Case Study

Can Manufacturer Saves More than $500,000 Annually by Reducing Compressed Air Usage

Case Study

Can Manufacturer Saves More than $500,000 Annually by Reducing Compressed Air Usage

Problem:
A manufacturer of three-piece cans wanted to reduce its compressed air usage to save money and qualify for a government grant awarded for energy savings. Like most can manufacturers, they were faced with multiple cooling and drying applications and had historically used a variety of compressed air nozzles and open pipes to accomplish these operations.


Blow off for can production system

Solution:

  • At the sheet separator, a 3HP blower with four air cannons now prevents steel sheets from sticking together when lifted into place on the conveyor belt. This system replaced six compressed air nozzles
  • After the cans are formed and welded, a 20HP blower with a 48” air knife is used to cool the weld seam, replacing a pipe with drilled holes emitting compressed air
  • The same 20HP blower powers a 96” air knife that pushes the cans firmly against a vertical magnetic belt that takes them for further processing. The air knife replaced another homemade pipe with holes
  • Prior to packaging, a 5HP blower and four 6” air knives are used to remove all moisture from the cans, replacing compressed air nozzles


Results:
The WindJet® Air Knife packages, powered by powerful, low maintenance regenerative blowers, produce high-velocity streams of clean, heated air and have eliminated the need for compressed air in these four operations. The systems operate 24/7 and have decreased plant compressed air use by nearly 3,800 scfm, generating electricity savings of more than $500,000 each year – including the cost of operating the new blowers. The payback for these systems was less than one month and the can manufacturer has qualified for a government energy grant.

For complete details of this case study click here to see the PDF version.

Contact us to find the right solution for your application. Talk to an expert