Automated Lube System Helps Automotive Parts Manufacturer Improve Product Quality While Reducing Oil Consumption by 50%
Automated Lube System Helps Automotive Parts Manufacturer Improve Product Quality While Reducing Oil Consumption by 50%
Problem:
Wolfgang Loch e.K., a leading German manufacturer of automotive parts, needed to coat metal feed stock with one of three different lubricants. A very low viscosity emulsion (3 to 5 cSt) is used for stamping or cutting and two different straight oils (viscosity ranging from 80 to 160 cSt at 40°C) are used for deep-drawing operations.
The previous lubrication system applied oil to the feed stock with felt rollers but regulating the lubrication using this method was difficult and coverage was inconsistent. The coil was often too wet or too dry. The process was messy and consumed too much oil. When Wolfgang Loch attempted to minimize oil flow, broken parts resulted. The felt rollers also needed to be replaced twice yearly, an expensive, on-going maintenance cost.
Solution:
An AutoJet® Lubrication System from Spraying Systems Co. has eliminated Wolfgang Loch’s lubrication problems. The system is controlled centrally from the press and features a coil lubricator which uses both airless and air atomizing sprays to optimize lubrication.
The low viscosity emulsion lubricant is applied by six hydraulic UniJet® nozzles. Each nozzle is supplied individually by an L210-type air-actuated piston pump. The pumps are mounted in a mobile base unit. The higher viscosity oils are applied by eight JAUCO external mix air atomizing nozzles metered by an air-actuated membrane pump.
Results:
The AutoJet® Lubrication System has improved Wolfgang Loch’s product quality. Scrap resulting from poor lubrication has been completely eliminated. In addition, the new system is significantly less expensive to operate. Non-contact spray lubrication has eliminated the need to replace expensive felt rollers every six months. The felt roller system was very time consuming to regulate, so the ability of the spray lubrication system to quickly and accurately reproduce a set value has significantly reduced set-up times.
Most importantly, oil consumption has been cut in half, generating a quick payback period for Wolfgang Loch.
For complete details of this case study, click here to see the PDF version.