The AutoJet^® systems operate at line speeds up to 300 m/min delivering a pre-set amount of lubricant evenly across the coil regardless of machine speed. Our PWM controllers and PulsaJet^® spray nozzles adjust flow to match speed variations during the run: the result is consistency from start to finish. From slow speeds to fast speeds and back again the amount you pre-set will be the amount you get.

Easy and accurate set up

The system is easy to set up and operate. Enter the amount of lubricant you require, select the number of nozzles based on coil width and press start! The AutoJet^® controller signals our PulsaJet^® spray nozzles to ensure the application rate is always perfect. Fully hydraulic sprays are used for most applications, but for extremely viscous oils, we also have an air-assisted nozzle.

Spray lubricants at ambient temperature

The P170 system handles most lubricant oils that don't require heating. The oil is simply sprayed at the ambient temperature.

For oils that need to be applied at elevated temperatures please have a look at the AutoJet^® HP170 Lubrication System.

Specifications

• Flow rate control via PWM (Pulse Width Modulation)
• No compressed air required

Dimensions and weights

• Available for all bands widths
• Dimensions will vary depending on band width
• Nozzle type: Air-Atomizing or Hydraulic PulsaJet^® Nozzle

Ideal for use in these applications

• Corrosion protection
• Roll forming
• Stamping
• Wire lubrication
• Tube lubrication