Case Study
Cannoli Producer Saves US$69,000 Annually with AccuCoat® Spray System
Problem:
A manufacturer was using an enrober to apply chocolate compound to 100,000 cannoli shells daily. The enrobing process wasted a significant amount of chocolate and required excessive downtime for equipment cleaning. In addition, the chocolate compound was over-applied and increased the calorie count of the cannoli.
![Cannoli spraying with accucoat spray system](/en-za/-/media/dam/industrial/usa/website-images/resources---660x370/case-study-cannoli-producer-saves-us69000-annually-with-accucoat-spray-system-660x370.jpg?h=370&w=660&la=en-ZA&hash=E1FCDC3F49B5DFFE6A5D4719358035C5)
Solution:
An AccuCoat Temperature-Controlled Spray System is now used to coat the inside of the cannoli shells. The system maintains the chocolate at 175°F (79.4°C) from the 10-gallon (38-L) tank until it exits the nozzles. A sanitary Model 63600 Spray Manifold, equipped with three air atomizing nozzles, is secured on both sides of a conveyor. Shells index three at a time and stop briefly so the nozzles can deliver a precise volume of chocolate to the inside of each shell.
Results:
Use of the AccuCoat Fully Jacketed Heated Spray System has resulted in a 50% reduction in chocolate use. The excessive labor and maintenance downtime required by the enrobing process have been eliminated. In addition, cannoli shells now have a consistent calorie since the chocolate is applied consistently to each shell. The manufacturer reports savings US$69,000 annually since the installation of the AccuCoat spray system and a payback period of 16 months.
For complete details of this case study click here to see the PDF version.